Tiles are one of the most popular kinds of flooring. Tile is incredibly durable and doesn’t take a lot of effort to maintain.

Unfortunately, some tile can be expensive.

Picking the best, affordable tile for your home depends on the kind of tile you buy, the size of your room, and how much work the contractor has to do during installation.

Not all tile is expensive, and for the types that are, there are a few things you can do to save a bit of money while still getting what you want.

But first, let’s take a look at average tile floor cost.

Different Types of Tile Floor Cost

The price you pay for your tile will depend heavily on the type of tile you get, and even things like texture can make the price go up or down.

On average, most people pay $1,755 for a typical tile installation. Of course, if you’re tiling a very large room or a much smaller room, the price will change somewhat.

Here’s a breakdown of what you can expect to pay for different types of tile.

Ceramic: $2-$7 per sq.ft.

This tile is made of clay, water, and other minerals. It comes in a lot of different colors and patterns, and it’s fairly inexpensive. A good choice if you want a strong tile.

Porcelain: $3-$7 per sq.ft.

Porcelain tile is another kind of ceramic tile, but it is less porous, meaning it won’t absorb as much moisture or grime. This is the type of tile you see as kitchen backsplashes because it is easy to keep clean.

Marble: $9-$20 per sq.ft.

Though it doesn’t make good kitchen floor, it can make a good kitchen counter, depending on what you like to cook. Marble comes in multiple different colors, not just whites and blacks.

Glass: $7-$30 per sq.ft.

You can use some types of glass tile on floors, but unless you know for sure the kind of glass tile you have can hold up as a floor, stick to using it for backsplashes and walls. This kind of tile is hard to install, but it is reflective and colorful.

Cement: $9-$17 per sq.ft.

Cement tile is usually handmade from natural materials, which can make it a bit pricey. But it is more durable than a lot of other tiles and makes good floors.

Stone: $6-$15 per sq.ft.

This kind of tile isn’t quite as resilient as others. Both water and acid can damage it. Because of this, you may want to keep it out of the kitchen unless you are prepared for the extra maintenance.

Granite: $10-$40 per sq.ft.

Granite is hard and very dense, which makes it a great choice for the kitchen or anywhere else that gets a lot of traffic. It can withstand a lot, but that does make it more expensive.

Travertine: $2.50-$5 per sq.ft.

Travertine is a type of limestone, and that gives it an earthy look. It’s a nice tile, and one of the cheapest you can buy, but it doesn’t hold up well to scratches or stained. So the kitchen isn’t the best place for it.

Slate: $4-$10 per sq.ft.

Slate is a metamorphic rock, meaning it is durable. You can put slate tile in the kitchen or any other room and it should hold up well.

Tile Floor Cost of Installation

Contractors usually charge about $70 an hour, but depending on the contractor you choose, this can vary somewhat. They will usually do the following things as part of the tile floor installation.

Surface Preparation

They will make sure the surface where they’ll install the floor is smooth, clean, and maintained. If there are things in the way of installation, like wall trim, they will remove them.


The carpenter will layout the tiles to practice the pattern and make sure the tiles don’t need to be cut to size.

Prep Work

This involves creating the adhesive mix and cutting any tiles that are too large.


They should start from the center of the floor and work their way towards the walls. Once the tile is laid out, they will make sure each piece is level.

Grouting Joints

This is the last step, and once it is finished and dried, the floor can be cleaned in preparation for the sealant.

Tile Floor Cost of Sealing

You don’t technically have to seal your floor, but if you want it to stay in good shape for the next several years, you should. A sealant will protect your grout and tile from scratches, discoloration, and other damages for up to 10 years.

It’s not a step you really want to skip.

You usually have to pay about $0.55-$1.50 per sq.ft. for a sealing job. This can take anywhere from three to four hours, but after the sealant has been applied, you should let it dry for another 24 hours at least.

This Sounds Like a Lot of Money…

Depending on the tile you choose, it can be. A high-end tile installation job can cost up to $5,000.

However, there are a few things you can do to cut tile floor cost a bit.

For example, you may be able to do all the prep work before the installation process so your contractor doesn’t have to. This could include cleaning out the room, removing old flooring, wall trim, and keeping the place clean until the tile can be installed.

You can also try installing tile floor yourself, but it’s a difficult and miserable job. Not something we recommend.

Tile Flooring: A Cost-Effective Choice

All these numbers may seem like their adding up fast, but remember, it’s only the high-end tile jobs that are a lot of money. Most people spend under $2,000 on their tile job, which includes buying the tile and the cost of installation.

Tile is a resilient and durable material, so it makes great floors, countertops, walls, and just about anything else you can think of. It also adds personality to your house with unique designs, patterns, and colors.

Tile should definitely be a top choice for your home.

Having a hard time deciding if you like porcelain or ceramic tile better? Find out which one is better for your home.